You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Compact, cold-atom clock for Navy field use

    SBC: VESCENT TECHNOLOGIES INC.            Topic: N13AT018

    Vescent Photonics proposes to develop a compact laser system and integrate it with a cold-atom micro primary standard developed under the DARPA IMPACT program. In phase I we will investigate performance enhancements resulting from immobilizing the cold-atom sample with an optical lattice formed from an optical field whose wavelength is chosen to minimize the differential light shifts between the s ...

    STTR Phase I 2013 Department of DefenseNavy
  2. Solid-State Green Laser

    SBC: Q-PEAK, INCORPORATED            Topic: N13AT023

    Green laser sources are important in advanced naval mine detection as this wavelength has good penetration though seawater. Mine detection programs such as the Coastal Battlefield Reconnaissance and Analysis (COBRA) system and the Airborne Laser Mine Detection System (ALMDS) currently use frequency-doubled 1-µm lasers as the laser source. The generation of green laser light via frequency doubling ...

    STTR Phase I 2013 Department of DefenseNavy
  3. Light-Weight Atmospheric Diving Suit

    SBC: MIDE TECHNOLOGY CORP            Topic: N13AT029

    The Navy is seeking a new light-weight Atmospheric Diving Suit (ADS) design. This suit must be less than 400 lbs; at this weight a diver will be able to self-propel using his legs and fins. The system must ensure the divers safety at a working depth of 1000 ft of sea-water; protecting the body from the high external pressure at depth, while providing a sustainable 1 ATM internal pressure. Mide in ...

    STTR Phase I 2013 Department of DefenseNavy
  4. Conformal Passivation of High Aspect Ratio HgCdTe Surfaces by ALD Using a Novel Cd-Precursor

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: A13AT013

    The goal of the proposed program is to identify an effective passivation material and develop a capable passivation methodology to protect highly reticulated HgCdTe surfaces. The proposed passivation material and technique using highly conformal atomic layer deposition (ALD) will allow the DOD to develop high-performance infrared focal plane array detectors that can operate under wider operating c ...

    STTR Phase I 2013 Department of DefenseArmy
  5. A universal framework for non-deteriorating time-domain numerical algorithms in Maxwell's electrodynamics

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: A13AT008

    The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves on unbounded regions. Numerical accuracy and/or stability may deteriorate over long times due to the treatment of artificial outer boundaries. We propose to develop a universal algorithm and software that will correct this problem by employing the Huygens'principl ...

    STTR Phase I 2013 Department of DefenseArmy
  6. Maneuver Prediction and Avoidance Logic For Unmanned Aircraft System Encounters with Non-Cooperative Air Traffic

    SBC: NUMERICA CORPORATION            Topic: N13AT003

    For Unmanned Aircraft Systems (UAS) to operate seamlessly in both the U.S. National Airspace System (NAS) and abroad, it will be crucial that they possess a sense-and-avoid (SAA) capability that can ensure safe operations among maneuvering, non-cooperative aircraft. Numerica Corporation, in partnership with Johns Hopkins University, proposes to develop a set of algorithms to model the uncertaintie ...

    STTR Phase I 2013 Department of DefenseNavy
  7. Low-Cost High Power Surface Emitting Micro-Stripe Quantum Cascade Laser Arrays

    SBC: EOS Photonics            Topic: N13AT006

    We envision a coherently coupled QCL array architecture featuring 2nd order DFB gratings to vertically couple out light with excellent beam quality and high output power. This approach does not require cleaving of the devices or facet coatings and is therefore inherently more robust and manufacturable than facet emitters.

    STTR Phase I 2013 Department of DefenseNavy
  8. Multi-scale modeling of corrosion fatigue damage using peridynamics theory

    SBC: CFD RESEARCH CORPORATION            Topic: N13AT007

    The overall objective of this effort is to identify, and validate a suitable methodology and the associated multi-scale computational technique for predictive assessment of corrosion fatigue damage in Naval aircraft. Annual costs for corrosion inspection and repair of military aircraft are estimated to exceed $1B. Predictive modeling of corrosion fatigue damage is challenging since it has to captu ...

    STTR Phase I 2013 Department of DefenseNavy
  9. Parametric Analysis of Various Test Configurations for Measuring the Interlaminar Fracture Toughness of CMCs using LayerSlayer and Abaqus

    SBC: AURORA FLIGHT SCIENCES CORPORATION            Topic: N13AT008

    The low weight, excellent durability and heat resistance of ceramic matrix composites (CMCs) make them attractive materials for use in aircraft engine hot sections, where improved overall engine efficiency can be realized. Nevertheless, the interlaminar properties of CMCs must be well understood before CMCs can realistically replace metallic superalloys in engine hot sections, and no standardized ...

    STTR Phase I 2013 Department of DefenseNavy
  10. Additive Manufacturing of Multifunctional Nanocomposites

    SBC: Sciperio, Inc.            Topic: A13AT010

    Sciperio with team members Georgia Institute of Technology and Centecorp have teamed up to develop an Additive Manufacturing Composite using nano and micro fillers. The team will develop multi-scale models that are supported by experimental characterization for advanced 3D Printable materials. Inelastic response of high strength hierarchical structures composed of engineered materials and specif ...

    STTR Phase I 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government