You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Propulsion Modeling

    SBC: METACOMP TECHNOLOGIES INC            Topic: MDA09T009

    The occurrence of combustion instability has long been a matter of serious concern in the development of liquid-propellant rocket engines due to the high rate of energy release in a confined volume in which energy losses are relatively small. Positive feedback between the acoustic waves and unsteady combustion could lead to the destruction of an engine in a fraction of a second. The situation is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  2. Contamination-free, Ultra-rapid Reactive Chemical Mechanical Polishing (RCMP) of GaN substrates

    SBC: Sinmat Inc            Topic: MDA09T001

    Gallium Nitride (GaN) substrates are ideal materials for fabrication of high-power and high-frequency devices based on III-V materials. The current state-of-the-art Chemical Mechanical Polishing (CMP) methods are plagued by several challenges, including, surface charge affects due to surface contamination, and sub-surface damages, which can limit the quality of III-V devices. Furthermore, there is ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  3. Development for Radiation Hardened Advanced Electronic Circuits

    SBC: United Silicon Carbide, Inc.            Topic: MDA09T006

    In response to SBIR topic MDA09-T006, USCI proposes to develop the first medium-level integrated circuit for radiation-tolerant applications. The advanced integrated circuit will be demonstrated based on a novel yet simple design SiC transistor that has the potential to provide a factor of 10X improvement in performance comparison to state-of-the-art. The SiC transistor can be fabricated by a subs ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  4. Low Cost, High Performance Transmit/Receive Integrated Circuits on a single chip

    SBC: ANOKIWAVE INC            Topic: MDA09T004

    The objective of this Phase I proposal is to demonstrate, through a rigorous design and modeling, the feasibility of a single chip Transmit/Receive Integrated Circuits (TRIC) with on-chip controller and compensation networks for next generation X-band radar systems. TRIC will include RF, analog and digital circuits on a single chip. TRIC functionality would include Frequency-modulated Continuous ...

    STTR Phase I 2010 Department of DefenseMissile Defense Agency
  5. A Li-Ion Battery Tool for Predicting Life and Performance for Satellite Orbit Operations Scenarios

    SBC: GLOBAL AEROSPACE CORPORATION            Topic: MDA08T008

    The expected life of satellite Li-Ion batteries is determined by many factors, including thermal considerations, electrode chemistries, orbit and mission life, DOD, and pulse power requirements. First-principles battery model literature pertains primarily to orbital cycling at moderate DOD under isothermal conditions without variable power loads. Knowledge must be extended to encompass wider life ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  6. Theoretical Innovations in Combining Analytical, Experimental, and Computational Combustion Stability Analysis

    SBC: HYPERCOMP INC            Topic: AF09BT38

    Combustion stability is an important consideration in the design of liquid rocket engines. While fundamental modes of unstable operation in simple geometries are easily identified using analytical methods, recent times have seen these methods greatly expand in scope, applied in semi-numerical format to increasingly complex geometries and flow situations. Much remains to be explored in understandin ...

    STTR Phase I 2010 Department of DefenseAir Force
  7. Innovative Combat Simulation to Craft Tomorrow’s UAV Operational Doctrine

    SBC: HPS Simulations            Topic: AF09BT31

    Existing computer combat wargames offer a sophisticated and high fidelity base platform for accurately modeling standard combat scenarios. However, the rapid development of UAV capabilities in terms of sizes, weapons, sensors, communications and flight ability is presenting a new challenge for these simulations. At the same time, the general state of world affairs is changing such that the likeli ...

    STTR Phase I 2010 Department of DefenseAir Force
  8. Advanced Computational Methods for Study of Electromagnetic Compatibility

    SBC: MATHEMATICAL SYSTEMS & SOLUTIONS, INC.            Topic: AF09BT13

    The present text proposes development of efficient, accurate and rapidly-convergent algorithms for the simulation of propagation and scattering of electromagnetic fields within and around structures that (i) Consist of complex combinations of penetrable materials as well as perfect and imperfect conductors, and, (ii) Possess complex geometrical characteristics, including open surfaces, metallic c ...

    STTR Phase I 2010 Department of DefenseAir Force
  9. Aerosol Jet Printing of Single-Wall Carbon Nanotube Transistors on Plastic Substrate

    SBC: OPTOMEC, INC.            Topic: AF09BT26

    Aerosol Jet printing is proposed as a method for printing large area, CNT-based transistor arrays on flexible substrate. The teaming relationship combines expertise in high resolution printing along with device and materials expertise. All semiconductor, dielectric, and conductive materials comprising the TFTs will be solution processed and printed with a single machine. This will lead to a cos ...

    STTR Phase I 2010 Department of DefenseAir Force
  10. Laser Induced Surface Improvement for Superior Wear Resistance in Extreme Conditions

    SBC: CFD RESEARCH CORPORATION            Topic: AF09BT19

    The objective of this Phase I project is to evaluate the use of novel Laser Induced Surface Improvement (LISI) techniques to provide surface modification to substrate materials which will provide superior wear resistance in extreme conditions. The specific application of interest is the hypersonic metal-to-metal contact that occurs at high speed test track facilities that can and has lead to catas ...

    STTR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government