You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

Displaying 1 - 10 of 188030 results
  1. Innovative Method for Strain Sensor Calibration on JSF Fleet Aircraft

    SBC: ATA Engineering, Inc.            Topic: N08025

    ATA Engineering, Inc., (ATA) developed and demonstrated a prototype SSCS for performing ground-based calibration of structural health sensors installed within the wings and horizontal/vertical tails of the F/A-18 aircraft. An automated user interface and...

    SBIR Phase II 2016 Department of DefenseAir Force
  2. Fully-Integrated Pressure and Temperature Sensitive Polymeric Nano-Coatings for Use in Hypersonic Facilities

    SBC: LeaTech, LLC            Topic: AF141232

    ABSTRACT: As the geometry of test articles becomes more complex the demand for evolving instrumentation to make global, quantitative surface pressure and temperature measurements across a diverse spectrum of test environments continues to increase. Traditionally, pressure sensitive coatings called pressure sensitive paints (PSPs) have been oxygen sensors. The need for a polymeric pressure sensi ...

    SBIR Phase I 2014 Department of DefenseAir Force
  3. Hybrid Battery/Supercapacitor Energy Storage Device

    SBC: ADA Technologies, Inc.            Topic: A15AT010

    ADA Technologies, Inc. (ADA) and Dr. Massoud Pedram at the University of Southern California (USC) have successfully completed a Phase I STTR effort for the development of a lithium ion (Li-ion)/ supercapacitor hybrid electrical energy storage system (HEESS) to afford pulse power characteristics (projected ~10 kW/kg) in a high energy system (100-150 Wh/kg). The system is enabled via a constant cur ...

    STTR Phase II 2016 Department of DefenseArmy
  4. Flexible Low Temperature CO2 Capture System, E-CACHYS

    SBC: ENVERGEX LLC            Topic: 1

    This project focuses on the design, integration and optimization of a flexible natural gas combined cycle plant with carbon capture, capable of operating in a highly variable renewable energy environment. Renewable energy sources such as wind and solar power offer unique solutions in our quest to reduce global carbon dioxide (CO2) emissions. However, the increasing penetration of these high variab ...

    STTR Phase II 2020 Department of EnergyARPA-E
  5. Cryo Thermal Management of High Power Density Motors and Drives

    SBC: HYPER TECH RESEARCH, INC.            Topic: 1

    We are solving the need to exceed 12kW/kg power density at takeoff for the motor, drive and thermal management system (TMS) for aircraft propulsion systems, In order to reach the overall systems targets called for in this solicitation, our program goal is to design and demonstrate an electric propulsion motor, drive, and TMS with a takeoff power of 17-20 kW/kg for a 2MW motor that can be scaled to ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  6. AERIALIST- 2nd generation motor for lArge ElectRIc Aircraft propuLsIon SysTems

    SBC: WRIGHT ELECTRIC, INC.            Topic: 1

    Wright Electric seeks to develop the next generation of all-electric vehicle through the innovative design of engine systems that use cutting edge innovations in integrated cooling, power electronics and rotor design. The innovative design will create a higher efficiency, higher performance motor without sacrificing safety or the use of existing manufacturing techniques. Phase I of this project wi ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  7. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase II 2020 Department of EnergyARPA-E
  8. Hot Filament CVD Technology for disruptive, high throughput SiC epitaxial growth reactors

    SBC: TrueNano, Inc            Topic: N18AT004

    TrueNano, Inc. will in collaboration with the University of Colorado and industry partners, produce a novel single wafer, high throughput, cold wall Hot Filament CVD (HF-CVD) reactor prototype for the growth of high-quality silicon carbide (SiC) epitaxial layers, suitable for the next generation of power electronic devices and systems. This includes the design and simulation of the reactor chamber ...

    STTR Phase II 2020 Department of DefenseAir Force
  9. SBIR Phase II: Increasing Maker Manufacturing through 3D Printing with Reclaimed Plastic & Direct Drive Pellet Extrusion

    SBC: RE3D Inc.            Topic: MN

    Fused Filament Fabrication (FFF) offers tremendous benefit for rapid prototyping, mass customization, and low cost fabrication. This creates an untapped opportunity to develop the technology further to support low volume industrial manufacturing for price sensitive and emerging markets. The ability to source locally available raw material and feed it directly as pellets or shavings into a printer ...

    SBIR Phase II 2019 National Science Foundation
  10. DroN2O: A Drone-Based System for Measuring Nitrous Oxide Emissions from Agricultural Fields

    SBC: Michigan Aerospace Corporation            Topic: 1

    Michigan Aerospace Corporation proposes to develop an inexpensive system to sense nitrous oxide (N2O) emissions from agricultural fields using laser-based sensors mounted on drones. These sensors include an optical absorption cell, a wind sensor, and a camera for plant health and ground assessment. The measurements from these sensors will be combined and processed with artificial-intelligence-enab ...

    SBIR Phase II 2020 Department of EnergyARPA-E
US Flag An Official Website of the United States Government