Niowave, Inc.

Basic Information

1012 N. Walnut Street
Lansing, MI, 48906-5061

http://www.niowaveinc.com/

Company Profile

n/a

Additional Details

Field Value
DUNS: 3
Hubzone Owned: Y
Socially and Economically Disadvantaged: N
Woman Owned: N
Number of Employees: 60


  1. Portable High-Intensity X-Ray Source Based on a 10 MeV Superconducting Electron Linac

    Amount: $150,000.00

    In the post 9/11 security environment, rapid cargo inspection has become a high priority. Cargo scanning using either radiographic imaging or active interrogation for Special Nuclear Material (SNM) re ...

    SBIR Phase I 2014 Department of Homeland Security
  2. A Fast Neutron Source using a Superconducting Electron Linac for Materials Testing

    Amount: $225,000.00

    Next generation reactor concepts cater to a common goal of providing safer, longer lasting and economically viable nuclear power plants. Developing radiation damage resistant materials for both in- co ...

    SBIR Phase I 2014 Department of Energy
  3. High Intensity X-Ray Sources to Eliminate High Activity Isotopes used for Sterilization

    Amount: $150,000.00

    Three different modalities of radiation sterilization currently exist: gamma-ray sterilization, electron beam sterilization, and x-ray sterilization. One of the most common ways to sterilize goods i ...

    SBIR Phase I 2014 Department of Energy
  4. Liquid Metal Targets for High Power Electron Beams

    Amount: $150,000.00

    The main focus of photonuclear physics has always been investigation of the internal spatial and spin structure of the nuclei and nucleons. While high energy photons (over 100 MeV) are used most often ...

    SBIR Phase I 2014 Department of Energy
  5. HPC Modeling to Aid Accelerator Component Manufacturing

    Amount: $1,000,000.00

    Electromagnetic and particle-beam modeling is an important part of the design and manufacturing of accelerator components, such as electron beam sources and RF accelerating cavities. The premier elect ...

    SBIR Phase II 2014 Department of Energy
  6. Development of a Superconducting RF Harmonic Cavity for eRHIC

    Amount: $1,000,000.00

    In the proposed collider eRHIC, hadrons from one of the RHIC storage rings will interact with electrons accelerated in a six-pass energy recovery linac (ERL). The maximum energy of protons will be 250 ...

    SBIR Phase II 2014 Department of Energy
  7. HPC Modeling to Aid Accelerator Component Manufacturing

    Amount: $150,000.00

    Electromagnetic and particle modeling is an important part of the design and manufacturing of accelerator components, such as electron beam sources and RF accelerating cavities. The premi ...

    SBIR Phase I 2013 Department of Energy
  8. Development of a High-brightness Field-Emission Superconducting RF Gun

    Amount: $150,000.00

    Field emission cathodes are well known in the field of electron microscopy and extensively used because their very small source size (e.g.: sharpened end of a needle) can lead to very high- brightne ...

    SBIR Phase I 2013 Department of Energy
  9. Development of a Superconducting RF Harmonic Cavity for eRHIC

    Amount: $150,000.00

    In the proposed collider eRHIC, hadrons from one of the RHIC storage rings will interact with electrons accelerated in a six-pass energy recovery linac (ERL). The maximum energy of protons will be 250 ...

    SBIR Phase I 2013 Department of Energy
  10. 400 MHz LHC Crab Cryomodule with HOM Dampers, Tuners and Couplers

    Amount: $1,000,000.00

    Superconducting radio frequency (SRF) cavities are being successfully used for acceleration of charged particle beams worldwide. The application of the SRF cavities for manipulation of the beam prope ...

    SBIR Phase II 2013 Department of Energy

Agency Micro-sites

US Flag An Official Website of the United States Government