You are here

Accelerator Technology Corporation

Company Information
Address
9701 Valley View Dr.
College Station, TX 77845-7158
United States



Information

UEI: QYNJE3HLPVM5

# of Employees: 4


Ownership Information

HUBZone Owned: No

Socially and Economically Disadvantaged: No

Woman Owned: No



Award Charts




Award Listing

  1. Nb3Sn SuperCIC Outsert and REBCO Conformal Insert for an 18 T Collider Dipole

    Amount: $199,743.00

    Accelerator Technology Corp. (ATC) and the Accelerator Research Lab (ARL) at Texas A&M Univcrsity have collaboratively developed a novel conformal winding methodology that could make it possible to or ...

    SBIRPhase I2021Department of Energy
  2. Jelly-roll fabrication of Textured-Powder Bi-2212/Ag wire

    Amount: $200,000.00

    Bi-2212/Ag wire has the capacity today to carry >1,000 Amps of current in a 1 mm wire in a magnetic field of >16 T, which should make it the conductor of choice in the dipole magnets for a future hadr ...

    SBIRPhase I2020Department of Energy
  3. Large-Aperture 6 T Dipole for Ion Storage Ring

    Amount: $149,171.00

    ATC requests Phase 1 SBIR funding to develop a 2-layer NbTi Cable-in-Conduit (CIC) conductor suitable for a large-aperture 6 T dipole. ATC has successfully developed a single-layer 13 kA NbTi CIC cabl ...

    SBIRPhase I2019Department of Energy
  4. Micro-aligned 1 Tesla solenoid for high-energy bunched-beam electron cooling

    Amount: $148,583.00

    The JLab Electron-Ion Collider (JLEIC) is proposed to collider spin-polarized beams of electrons and ions at high energy and high luminosity- Sustaining high luminosity requires the use of bunched-bea ...

    SBIRPhase I2018Department of Energy
  5. Friction-Stir-Weld Connectors for Cables and Conductors

    Amount: $150,000.00

    In the present-day network of high-voltage overhead transmission lines, segments of cable are joined by a crimp splice joint, in which the locking of strands in the two cables relies upon a serrate sl ...

    SBIRPhase I2016Department of Energy
  6. Textured-Powder Jelly-Roll Process for High-Performance Bi-2212/Ag Wire

    Amount: $150,000.00

    Superconducting wire is used in electromagnets that are used in energy research particle accelerators, fusion tokomaks and in biomedical research - NMR imaging and spectroscopy. New frontiers in tho ...

    SBIRPhase I2011Department of Energy
  7. Plasma Torch Synthesis of Homogeneous C-alloyed MgB2 for High-Field Applications

    Amount: $100,000.00

    MgB2 is proving to be a very promising superconductor. Until recently, the low critical field of pure MgB2 had inhibited its use for higher-field applications, such as for high energy physics experim ...

    SBIRPhase I2007Department of Energy
  8. Inert-Gas Buffering for Particle Size Separation of Superconductor Precursor Powders

    Amount: $328,600.00

    The removal of all particles over a desired micron-scale size threshold from a powder sample is critical to the development of fine-filament, powder-in-tube superconducting wires, for which the final ...

    SBIRPhase II2006Department of Energy
  9. Inert-Gas Buffering for Particle Size Separation of Superconductor Precursor Powders

    Amount: $100,000.00

    78953 In the fabrication of powder-in-tube (PIT) Nb3Sn superconductors, needed for high energy physics applications, the particle size distribution limits the final filament size to which the strand c ...

    SBIRPhase I2005Department of Energy
  10. SiC/HT-9 MMC Composite Tubes for Fuel Cladding

    Amount: $100,000.00

    73043S03-I The cladding of fuel rods for Gen IV nuclear reactors must operate under extremely harsh conditions: high temperature (up to 1000 C in some designs), radiation damage from both fast and t ...

    SBIRPhase I2003Department of Energy
US Flag An Official Website of the United States Government