You are here

A Hybrid HTS/LTS Superconductor Design For High-Field Accelerator Magnets

Award Information
Agency: Department of Energy
Branch: N/A
Contract: DE-SC0011348
Agency Tracking Number: 217314
Amount: $999,444.00
Phase: Phase II
Program: STTR
Solicitation Topic Code: 33b
Solicitation Number: DE-FOA-0001193
Timeline
Solicitation Year: 2015
Award Year: 2015
Award Start Date (Proposal Award Date): 2015-04-06
Award End Date (Contract End Date): 2017-04-05
Small Business Information
2 Center Street
Upton, NY 11973-5000
United States
DUNS: 141243795
HUBZone Owned: No
Woman Owned: No
Socially and Economically Disadvantaged: No
Principal Investigator
 Ramesh Gupta
 Dr.
 (631) 344-4805
 gupta@bnl.gov
Business Contact
 James Kolonko
Title: Mr.
Phone: (818) 625-9155
Email: kolonko@pacbell.net
Research Institution
 Brookhaven National Laboratory
 Ramesh Gupta
 
2 Center Street
Upton, NY 11973-5000
United States

 (631) 344-4805
 Federally Funded R&D Center (FFRDC)
Abstract

Proposed designs for a Future Circular Collider (FCC) to collide protons with a center-of-mass energy of 100 TeV call for dipoles with fields up to 20 Tesla (T). This is significantly beyond the present technology and requires using High Temperature Superconductors (HTS). The recent Particle Physics Project Prioritization Panel (P5), organized by the U.S. Department of Energy (DOE), strongly supports the U.S. maintaining its leadership in superconducting magnet technology. This STTR proposes to design, build, and test a proof-of-principle hybrid dipole that uses HTS in its highest-field regions and less-expensive low-temperature superconductors, Nb3Sn and NbTi, where they suffice. During Phase I, a coil block with ReBCO tape with Kapton insulation was fabricated and tested, confirming that winding had no measurable degradation. A major concern in the magnets built with ReBCO is the large field errors associated with the conductor magnetization in the tape geometry. The major discovery during Phase I was finding a solution to reduce those errors considerably. Based on this and work performed under previous SBIR/STTRs and other programs, HTS coils will be designed and built in Phase II and then integrated with the existing Nb3Sn common coil dipole. This provides a unique opportunity to test the concept in a proof-of-principle hybrid magnet with field approaching 15 T. A 20 T hybrid dipole design will also be developed with the goal of satisfying the requirements of accelerator magnets and reducing cost.

Commercial Applications and Other Benefits: Since the cost of HTS superconductors is high and likely to remain so, it is important to minimize HTS usage. Commercial spin-offs in the areas of energy technologies (SMES, wind turbines), medical accelerators, security screening, and motors or generators for direct-drive wind turbines can be enabled by this technology, just as the development of NMR and MRI magnets was enabled by magnet R&D for previous generations of high-energy- physics accelerators. The knowledge gained from this program will provide valuable feedback to the conductor manufacturers in their efforts to improve these conductors to better meet the needs of the magnet community.

* Information listed above is at the time of submission. *

US Flag An Official Website of the United States Government