A Hydrostatic Processing Facility for Superconducting Wire

Award Information
Agency: Department of Energy
Branch: N/A
Contract: DE-FG02-03ER83602
Agency Tracking Number: 72984S03-II
Amount: $661,743.00
Phase: Phase II
Program: SBIR
Awards Year: 2004
Solicitation Year: 2003
Solicitation Topic Code: 46
Solicitation Number: DOE/SC-0059
Small Business Information
Alabama Cryogenic Engineering, Inc.
P.O. Box 2470, Huntsville, AL, 35804
DUNS: N/A
HUBZone Owned: Y
Woman Owned: N
Socially and Economically Disadvantaged: N
Principal Investigator
 John Hendricks
 Dr.
 (256) 536-8629
 incalabama@bellsouth.net
Business Contact
 Mary Hendricks
Title: Mrs.
Phone: (256) 536-8629
Email: incalabama@bellsouth.net
Research Institution
N/A
Abstract
72984-Currently available methods impose limits on the processing of multi-filamentary, superconducting wires used in high energy physics experiments. These limits can be severe when one of the wire components has a mechanical strength substantially smaller than the other component(s), and can eliminate many desirable wire designs from consideration. Niobium-Tin and Niobium-Aluminum are examples of systems that exhibit this problem. Recent experimental work has shown that hydrostatic reduction, using low-angle dies and relatively large-area reductions (greater than 4:1), can produce good results with a much wider range of material mechanical strengths; in particular, jelly roll structures including niobium, copper, and tin have been processed successfully. Yet, when these same systems were processed using cold drawing, the results were unacceptable. This project will develop a hydrostatic processing facility that uses only high area reductions and could have an important impact on superconducting wire production, along with additional improvements in performance. Phase I demonstrated that it is possible to build a relatively large diameter (D = 6¿) pressure vessel that can withstand 150,000 psi. The design uses proven elements taken from the design of conventional extrusion presses. The pressure vessel will enable the production of wire samples in the 300' to 2,000' range, depending on wire diameter, which can be cabled and tested for magnet performance. In Phase II, the high pressure vessel will be built and joined with two other existing vessels to form a Hydrostatic Wire Processing Facility (HWPF). The HWPF will be able to process billets from up to 3" in diameter and 5' long to down to wire size, with all processing done hydrostatically with high area reductions and low angle dies. Several wire geometries will be tested in the HWPF. Commercial Applications and Other Benefits as described by awardee: The Hydrostatic Wire Processing Facility (HWPF) should extend the ¿parameter space¿ for the production of superconducting wire, allowing wire architectures that cannot be processed with cold-drawing. In addition, larger numbers of elements can be succesfully process in order to reduce effective filament diameter. If the overall program is successful, the HWPF will define the ¿next generation¿ Niobium Tin superconducting wire material.

* information listed above is at the time of submission.

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government