Topics

Reset

NOTE: The Solicitations and topics listed on this site are copies from the various SBIR agency solicitations and are not necessarily the latest and most up-to-date. For this reason, you should visit the respective agency SBIR sites to read the official version of the solicitations and download the appropriate forms and rules.

If no search results for your keyword(s) were found, you are encouraged to review Agency omnibus solicitations for additional funding opportunities. Omnibus solicitations are structured to be broad, extensive Programmatic issuances with research areas related to the petitioning Agency and are not limited to predetermined Topics/Subtopics. If upon reviewing you have additional questions, you may consider reaching out to the respective Agency for clarification regarding acceptable proposals (https://www.sbir.gov/agency-contacts).

  1. A19-065: Thermal Deception Device for Mission Command

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): HUMAN SYSTEMS OBJECTIVE: Develop a rapidly deployable thermal signal emitting deception device of high value battlefield assets that provides Soldiers with the ability to simulate thermal signatures during Mission Command operations. The development of this system will result in improved stationary and/or mobile deceptive capabilities in the battlefield. The device will help ...

    SBIR Department of DefenseArmy
  2. A19-066: Electronic Textile Enabled Personal Area Networks (EPAN) for Ground and Air Soldiers

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): ELECTRONICS OBJECTIVE: Develop and demonstrate an electronic textile integrated personal area network within a load carrying vest for both ground and air soldier applications that supports a distributed power manager, end user device (EUD), batteries, and up to 8 peripheral devices DESCRIPTION:Over the past twenty years electronics have been miniaturized for personal use, and ...

    SBIR Department of DefenseArmy
  3. A19-069: Manufacturing Production of Electronic Textiles and Connectors for Wearable Heating Devices

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): MATERIALS OBJECTIVE: Develop and demonstrate the feasibility to mass produce electronic textiles and connectors that have been hardened for battlefield use, integrated into functional heated handwear for military applications, and are readily mass producible with Berry compliant components. DESCRIPTION:Over the past twenty years electronics have been miniaturized for personal ...

    SBIR Department of DefenseArmy
  4. A19-070: Innovative Primer Design for Large Caliber Ammunition

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): WEAPONS OBJECTIVE: Develop innovative designs to reliably initiate large caliber ammunition propellant beds using the electric impulse of the current Abrams fire control system. DESCRIPTION:The current large caliber ammunition primer design utilizes legacy technology and manufacturing techniques and is a prime candidate for a technical refresh and/or an entirely new/novel app ...

    SBIR Department of DefenseArmy
  5. A19-071: Weather Situational Awareness in the Cockpit

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): AIR PLATFORM OBJECTIVE: Provide graphical weather information in the cockpit of tactical aircraft. DESCRIPTION:There is no existing system to display live and forecasted weather to the aircrews of tactical aircraft and Tactical Air Traffic Control (ATC). This project would explore options for weather data sources as well as display in the cockpit and ATC facilities.The soluti ...

    SBIR Department of DefenseArmy
  6. A19-072: Micro Identification Friend or Foe (IFF) Transponder

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): ELECTRONICS OBJECTIVE: Design and develop a micro Identification Friend or Foe (IFF) transponder system, with capability for Modes 1, 2, 3/A, C, 4, 5, S, and Automatic Dependent Surveillance-Broadcast (ADS-B), with a small form factor to meet the space, weight, and power (SWaP) requirements for Group 2 Unmanned Aerial Vehicles (UAVs). DESCRIPTION:Current IFF transponder syste ...

    SBIR Department of DefenseArmy
  7. A19-073: Secure Avionics Mobile and Windshield Display Technologies

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): AIR PLATFORM OBJECTIVE: Develop data models, architectural concepts, and components for use in developing a common avionics display technologies that can be used to securely transfer data from mobile devices, such as Electronic Flight Bags (EFB), with interfaces to the avionics suite for docking, data transfer, Heads up Display (HUD), windshield display, or other alternative ...

    SBIR Department of DefenseArmy
  8. A19-074: Safe High Performing Rechargeable Military Battery

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): MATERIALS OBJECTIVE: To provide a safe high specific energy battery utilizing the BB-2590 form factor and incorporating high performance rechargeable chemistry to enable extended runtime for needed capabilities. DESCRIPTION:Program Executive Office Command Control and Communications-Tactical (PEO C3T) and Communications Electronics Research, Development and Engineering Center ...

    SBIR Department of DefenseArmy
  9. A19-076: Expeditionary Additive Manufacturing (AM): Metallic Based Systems

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): GROUND SEA OBJECTIVE: Develop, validate, and integrate a metallic based Additive Manufacturing (AM) processes into the Metal Working and Machining Shop Set (MWMSS) DESCRIPTION:The Army faces ongoing readiness challenges due to part obsolescence and the inability to rapidly obtain service parts for aging systems. This is especially true for fielded systems, which have a supply ...

    SBIR Department of DefenseArmy
  10. A19-077: Effective Heat Exchanger Performance

    Release Date: 11-28-2018Open Date: 01-08-2019Due Date: 02-06-2019Close Date: 02-06-2019

    TECHNOLOGY AREA(S): GROUND SEA OBJECTIVE: To develop a high effectiveness heat exchanger for the AMPV while maintaining unit cost equivalence with the current military production heat exchanger. The heat exchanger needs to maintain acceptable durability and reliability targets of the current military production heat exchanger. DESCRIPTION:The military is upgrading their fleets to increase vehicl ...

    SBIR Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government