You are here

Closed

Reset

NOTE: The Solicitations and topics listed on this site are copies from the various SBIR agency solicitations and are not necessarily the latest and most up-to-date. For this reason, you should visit the respective agency SBIR sites to read the official version of the solicitations and download the appropriate forms and rules.

Displaying 121 - 130 of 18924 results
  1. N11A-T035: Safe High Voltage Cathode Materials for Pulsed Power Applications

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: To develop electrochemical materials for high density Li-ion batteries capable of supporting high transient and pulsed loads while offering enhanced safety and lifecycle performance. DESCRIPTION: Future Navy applications will require large amounts of stored energy to support loads which have high discharge and transient characteristics including pulses and similar waveforms. A wide ...

    STTRPhase IDepartment of DefenseNavy
  2. N11A-T036: Weather and Environmental Software Tool for System Requirements Investigation

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Develop a validated analysis software package that can be used as a system requirement estimation tool to aid the aviation/missile development community in establishing real-world probabilities of encounter various weather related events. This tool will be able to predict the probability of encounter for a wide variety of weather events and phenomena. As weather databases tend to be lar ...

    STTRPhase IDepartment of DefenseNavy
  3. N11A-T037: Desktop Manufacturing with Micro-robot Swarm

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Develop a swarm of micro-robotic fabrication machines that will enable the manufacture of new materials and components. Address the major technical issues in developing these micro-robotic machines, the platform hardware, and the architecture for their communication and control. DESCRIPTION: Desktop manufacturing is the ability to use a personal computer to drive a miniature fabricat ...

    STTRPhase IDepartment of DefenseNavy
  4. N11A-T038: Scenario Based Tactical Radio Channel Simulator

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Research and develop a RF channel simulation framework to test the next generation of mobile multi-protocol wideband tactical systems. The framework would allow for the generation of a model based scenario via a script based interface or via a GUI that allows the user to model the effects of mixed mobile and fixed multi-link radio network using this real-time channel simulator. The sim ...

    STTRPhase IDepartment of DefenseNavy
  5. N11A-T039: New Process for Space Qualified Electronic Components

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Develop a new design or manufacturing process to quickly produce electronic components that are reliable in the space environment. DESCRIPTION: Space is a harsh environment. Spacecraft are subjected to high levels of radiation depending on the orbit. Spacecraft undergo extreme thermal cycles as they move in and out of direct sunlight. Temperatures range from -171C to 108C at geosy ...

    STTRPhase IDepartment of DefenseNavy
  6. A11a-T011: High Risk Rapid Ethnographic Assessment Tool (HRREAT)

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: To develop an integrated software tool for the collection, management, analysis, and visualization of ethnographic data in high risk areas. DESCRIPTION: The collection and analysis of socio-cultural data is becoming increasingly important for the conduct of effective military operations. The production of more scientifically valid models of human behavior has itself become increasin ...

    STTRPhase IDepartment of DefenseArmy
  7. A11a-T012: Generation of Hydrogen from Methanol

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Exploration of alternative approaches to generate hydrogen from methanol without thermal reforming. Current thermal reformers operate at elevated temperatures. Novel methanol electrolysis processes that converts methanol into hydrogen for use in low power fuel cells will be developed. DESCRIPTION: Current low power Army Fuel cells that are being developed either steam reform metha ...

    STTRPhase IDepartment of DefenseArmy
  8. A11a-T013: Biomimetic Membranes for Direct Methanol Fuel Cells

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Develop new biomimetic membranes with chemical stability and reduced methanol crossover to enable micro direct methanol fuel cells (DMFCs). DESCRIPTION: The Army has need for high-energy density, lightweight power sources for the dismounted warrior. Currently methanol fueled polymer electrolyte based fuel cells suffer from methanol cross over which reduces overall system efficienc ...

    STTRPhase IDepartment of DefenseArmy
  9. A11a-T014: High-capacity and Cost-effective Manufacture of Chloroperoxidase

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: Develop a fungal protein expression system with integrated purification scheme for low-cost production of purified, functional Chloroperoxidase in kilogram quantities. DESCRIPTION: Chloroperoxidase (CPO) is an enzyme produced by certain fungal species that catalyzes a diversity of biochemical reactions. For example, the CPO produced by the filamentous fungus Caldariomyces fumago cat ...

    STTRPhase IDepartment of DefenseArmy
  10. A11a-T015: A Priori Error-Controlled Simulations of Electromagnetic Phenomena for HPC

    Release Date: 01-27-2011Open Date: 02-28-2011Due Date: 03-30-2011Close Date: 03-30-2011

    OBJECTIVE: The objectives of this STTR are to investigate numerical methods for predictably-accurate treatment of boundary conditions in electromagnetic and other wave-dominated phenomena, and to develop algorithms and computer software that can be implemented for military and commercial simulation applications. DESCRIPTION: High fidelity modeling of electromagnetic phenomena has become incre ...

    STTRPhase IDepartment of DefenseArmy
US Flag An Official Website of the United States Government