You are here

Closed

Reset

NOTE: The Solicitations and topics listed on this site are copies from the various SBIR agency solicitations and are not necessarily the latest and most up-to-date. For this reason, you should visit the respective agency SBIR sites to read the official version of the solicitations and download the appropriate forms and rules.

Displaying 151 - 160 of 18910 results
  1. A19-147: Adaptive Thermal Control of Munition Components and Reserve Power using Exothermic-Based Composite Structures

    Release Date: 08-23-2019Open Date: 09-24-2019Due Date: 10-23-2019Close Date: 10-23-2019

    TECHNOLOGY AREA(S): Battlespace OBJECTIVE: Develop exothermic-based composite structures that possess sufficient mechanical properties to withstand setback launch forces and spin rate inertias of gun-fired munitions and to provide adaptive heating on-demand for thermal management of munitions components such as power sources at low temperatures. The systems objective is to significantly extend th ...

    SBIRPhase I/Phase IIDepartment of DefenseArmy
  2. N162-090: Adaptive Training System for Maintaining Attention during Unmanned Aerial Systems (UAS) Operations

    Release Date: 04-22-2016Open Date: 05-23-2016Due Date: 06-22-2016Close Date: 06-22-2016

    TECHNOLOGY AREA(S): Air Platform, Human Systems ACQUISITION PROGRAM: PMA-205, Naval Aviation Training Systems OBJECTIVE: Develop an innovative and adaptive training system, techniques and computer-based simulation trainer, for Unmanned Aerial Systems (UAS) operators to maintain attentiveness during long shiftwork associated with extended UAS missions. DESCRIPTION: With the expanding use of UAS com ...

    SBIRPhase IDepartment of DefenseNavy
  3. N201-X02: ADAPT- Naval Depot Modernization and Sustainment

    Release Date: 12-10-2019Open Date: 01-14-2020Due Date: 02-12-2020Close Date: 02-26-2020

    TECHNOLOGY AREA(S): Battlespace, Human Systems OBJECTIVE: The Department of the Navy (DON) sustainment community is urgently seeking modern tools, solutions, and processes to reliably and safely get DON assets back in the field as quickly as possible. Technologies for maintaining and sustaining ships, aircraft, and ground vehicles have advanced significantly in the past 50 years. Yet, the DON sus ...

    SBIRPhase I/Phase IIDepartment of DefenseNavy
  4. 14.11: Additional Information

    Release Date: 01-31-2012Open Date: 03-05-2012Due Date: 01-08-2013Close Date: 01-08-2013

    The NEI's programs are described in more extensive detail in documents which are available from the Institute. For additional information about the research programs of the NEI, please visit our home page at http://www.nei.nih.gov. For more information on research topics, contact: Jerome Wujek, Ph.D. Research Resources Officer Division of Extramural Research National Eye Institute ...

    SBIRPhase IDepartment of Health and Human Services
  5. 14.11: Additional Information

    Release Date: 01-31-2012Open Date: 03-05-2012Due Date: 01-08-2013Close Date: 01-08-2013

    The NEI's programs are described in more extensive detail in documents which are available from the Institute. For additional information about the research programs of the NEI, please visit our home page at http://www.nei.nih.gov. For more information on research topics, contact: Jerome Wujek, Ph.D. Research Resources Officer Division of Extramural Research National Eye Institute ...

    STTRPhase IDepartment of Health and Human Services
  6. 16.7: Additional Programs and Services for NHLBI SBIR Awardees

    Release Date: 01-31-2012Open Date: 03-05-2012Due Date: 01-08-2013Close Date: 01-08-2013

    The NHLBI encourages all Phase II applicants to apply to the NIH Commercialization Assistance Program to gain assistance in transferring their products to the marketplace. For additional information on research areas, please contact: Cardiovascular Sciences Albert Lee, Ph.D. Division of Cardiovascular Sciences Advanced Technologies and Surgery Branch 6701 Rockledge Drive, Room 8204 B ...

    SBIRPhase IDepartment of Health and Human Services
  7. 16.7: Additional Programs and Services for NHLBI SBIR Awardees

    Release Date: 01-31-2012Open Date: 03-05-2012Due Date: 01-08-2013Close Date: 01-08-2013

    The NHLBI encourages all Phase II applicants to apply to the NIH Commercialization Assistance Program to gain assistance in transferring their products to the marketplace. For additional information on research areas, please contact: Cardiovascular Sciences Albert Lee, Ph.D. Division of Cardiovascular Sciences Advanced Technologies and Surgery Branch 6701 Rockledge Drive, Room 8204 B ...

    STTRPhase IDepartment of Health and Human Services
  8. HR0011SB20234-15: Additive Components Enhanced for Extreme Environments (ACE3)

    Release Date: 11-15-2022Open Date: 07-24-2023Due Date: 02-01-2024Close Date: 08-23-2023

    OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Advanced Materials The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls ...

    SBIRPhase I/Phase IIDepartment of DefenseDefense Advanced Research Projects Agency
  9. N212-115: Additive Fiber Reinforced Composite Repair for Aircraft

    Release Date: 04-21-2021Open Date: 05-19-2021Due Date: 06-17-2021Close Date: 06-17-2021

    RT&L FOCUS AREA(S): General Warfighting Requirements (GWR) TECHNOLOGY AREA(S): Materials / Processes OBJECTIVE: Develop a novel additive material deposition system that produces high-quality composite laminate repairs that return parts to original strength. DESCRIPTION: High-performance composite materials used on current, and future, aircraft construction will exhibit damage and wear throughou ...

    SBIRPhase I/Phase IIDepartment of DefenseNavy
  10. T12.01: Additively Manufactured Electronics for Severe Volume Constrained Applications

    Release Date: 01-10-2023Open Date: 01-10-2023Due Date: 03-13-2023Close Date: 03-13-2023

    Scope Title:Additive Manufactured Electronics for Severe Volume Constrained ApplicationsScope Description:The field of Additively Manufactured Electronics (AME) has been evolving and can provide enabling capability for future NASA missions that have very severe or unique volume constraints. Several concepts for NASA missions or mission concepts in the decadal survey where these volume constraints ...

    STTRPhase INational Aeronautics and Space Administration
US Flag An Official Website of the United States Government